TeleMedCare :: Medical devices for physicians

MedDay® Puzný oximeter - SpO2, PR, PI, RR

MedDay® Puzný oximeter - SpO2, PR, PI, RR

Buy

Technical specification

Display parameter :

1.
Oxygen saturation (SpO2)-- Measuring range:70-99% measurement accuracy : 70%-90% ±2%. If the value below 94%, Insufficient oxygen supply.
(PR)BPM -- Measuring range: 30 bpm - 250 bpm .
PI -- Measuring range: 0.2%-30% , PI means Perfusion Index , it shows Blood perfusion ability .
Respiratory frequency detection(RR) -- Normal adult breathe 16-20 times per Minute. Respiratory pulse ratio is 1:4, every one breath , four Pulse beats.Normal child breathe fast than adult , breathe 20-30 times per Minute, Newborn could breathe 44 times per Minute.

2.
Display Screen: Blue and Yellow two colors OLED Screen.

3.
Display Directions:Four Directions, Six display modes

4.
Energy saving: Two AAA batteries could use more than 40 hours.（For transportation reason , batteries is not included . ）

5.
Voltage warning: There has Low voltage warning.

6.
Automatic shut-down: Automatic shut-down in 8 secends when there has no signal.

7.
Advantage: Integrating blood oxygen probe and processing display module, the product is easy to use, low power consumption, small size, light weight, and portable.

♥ With 4 parameters: SPO2, PR, PI(Perfusion Index), RR (Respiratory Rate) ;

♥ With alarm & beep function & 5 levels brightness;

♥ Two color OLED display, 6 display modes & 4 directions display;

♥ Automatically standby or sleep after 8 seconds without finger in it ;

♥ Low-power consumption and with low battery indicator .

♥ Lightweith and small in size for carrying and easy to use .

♥ Widely used at home , medical institution and community centers ,etc

♥ With accessories a lanyard to protect your pulse oximeter from dirt and damage and easy to carry .

How does the PI & RR help?

♥ Perfusion Index

The Perfusion Index (PI) informs you of the strength of your pulse. If the PI value is less than 0.2%, this means that your hands are either too cold or improperly positioned in the pulse oximeter. Simply warm your finger and reposition it so that it is right between the LED light and sensor. No more second guessing if the readings are reliable or why the pulse oximeter is not giving a reading.

♥ Respiration Rate

Respiration Rate (RR) is the number of breaths per minute. It is an important diagnostic basis in clinical diagnosis. Unusually high or low indicates the likelihood of some diseases, such as bradypnea, apnea, and shortness of breath.

- SpO2

Measurement range: 35~100%

Resolution: ±1%

Accuracy: ±2% (80%~100%) , ±3% (70%~80%), unspecified (=<70%)

- Pulse rate

Measurement range: 25~250 bpm

Resolution: ±1bpm

Accuracy: ±2bpm

- Perfusion Index ( PI)

Measurement range: 0~30%

Resolution: ±0.1% (0.07%~10%) 1%(10%~20%)

Accuracy: ±1%

- RR (Respiration Rate):10-70 rpm

Resolution: 1 rmp

Accuracy: 2 rpm

- Power:1.5V (AAA size) alkaline battery x 2

- Working current: ≤30mA

- Automatic power-of: Automatically power off when no signal in the oximeter after 8 seconds

- Environmental Sepecification

Operating Temperature:5-40 degrees ;

Storage/Transportation Temperature:-20 to 55 degrees Celcius;

Relative Humidity:15-80% on operation

Notice:

1. Please double check the direction of the battery. The 2 batteries are in different direction, please make the +/- right.
2. The finger should be plugged deep enough, or it can not take the measure
3. Please do not tremble the finger or move the body during the measurement, or the data maybe unsteady.
Specification:
Material: ABS + PC
Product size: 62 * 32 * 33mm
Battery: 2 * AAA 1.5V (not included)

Package Included:

1 x oximeter

1 x cord

1 x english manual

1 x slovak manual

MedDay® Puzný oximeter - SpO2, PR, PI, RR

Technical specification

Photo

Photo